I would like to have all three(110/119/129) on the same dish. Currently I have 110 and 119.
From what I've read, sounds like some people drop 110 and just go with 119 and 129 because it is easier of a set up. Is this true?
Currently I have a 24" elliptical dish. Will this work for all three?
Your dish should work - looking from behind the dish you will have 129/119/110 .
Yes you will have to - since you are already pointing at 110/119 your dish will require only minor tweaking.
Np - there are lots of subforums to get lost in .lol..... good luck with your upgrade
i live in southern california and have a 24 elliptical dish with 5 lnbs plastic bracket with stamped numbers for 119, 110,101,91,82, i have it set up for 110,119, 91. want to get 129 and remove 91. my question is how do i set up 129 in the bracket?
Remove all LNB's, then using the 3 middle LNB mounts, put the LNB for 119 in the middle, the 110 LNB on the left and the 129 LNB on the right.
Go to dishpointer.com and set your location, then select the 110,119,129 selection under the multi-LNB selection, align the dish to these new co-ordinates, tweak the dish for the best performance on 119, then skew the dish for 110 and 129, use TP 12457 to find 119, then use TP 12516 to find 129, 110 is TP 12224.
♫♫♫ Iím a lumberjack and Iím OK ♫♫♫ I drink all night and sleep all day. ♫♫♫
Coming soon to a crop circle near you.....
There is a 66 and third % chance that I'm on the right planet...
"I'm happier then a Jackalope in a balloon factory"
"First rule of testing satellites"
"If its working fine now, then don't mess with it"
"Second rule of testing satellites"
"If you did mess with it, and now it doesn't work, can you blame someone else?"
"Third rule of testing satellites"
"If you did mess with it, and it doesn't work now, and you can't blame someone else"
"Can you HIDE it"?