Toys include:
1. 36” Motorized GeoSat w/DMX522
1. 48” Motorized ASC Signal DMX522
1. 10' Unimesh 18” actuator DMX741
1. 10' Unimesh 18” actuator DMX741U
1. 10' (no name solid) used as a solar collector
sokul1,
The world direct dish "using linear lnb" is fine for getting the channels you want here in Chicago.I am successfully using a smaller dish (32.5" x 22.5") and receiving those channels fine with a viewsat ultra.Trwam & radio maryja are on the following tp.
12120V
S/R-30000
Fec-3/4
I see that when scanning my nFusion HD or Nfusion Nova
(Coolsat 7000 micro-PVR-remote is on its way).
I get both bars at or above 90%. but still no list of channels.
or satellites that that should be locked in?
one.
I ether don't know how to program with the (flicker) remote control?
two.
my firmware is not the correct one?
or
three.
theirs something else Im not doing?
I'm not familiar with the Nova, but on the NFHD you will need to manually enter the current transponders, then rescan.
This list is not the most up to date but it is the best there is.
hxxp://www.lyngsat.com/america.html
Toys include:
1. 36” Motorized GeoSat w/DMX522
1. 48” Motorized ASC Signal DMX522
1. 10' Unimesh 18” actuator DMX741
1. 10' Unimesh 18” actuator DMX741U
1. 10' (no name solid) used as a solar collector
I seems that in order for me to watch
tv-trwam -------AMC 4 - 101° WEST - SES 1
i need to have my tp set on
12120 v 30000
I do and many others are set on tp...
but the signal I get from this is the first bar only at about 87%
some on 103w are at 90%
but both have no second straighten indication on the second bar ,,NFHD & Nfusion Nova
now on the NFHD I i pressed continuously f5 and its stuck on the $ preview and it wont move
a while back i remember scanning and I got many paid channels and one direct tv instructional video
now I don't have any
totally lost
any advice?
I don think i know how to store the amc4 / ses1 into the file in the programmable memory om my NFHD or nova?
What settings are you using on the dish?
Elevation-?
Skew-?
Elevation-40 degrees (up)
Skew-98degrees (tilted)
LNBF +14.3 degrees rotation
magnetic compass reading 202 degrees
60090 zip per: dishpointe & geosatfinder
I am not sure how the world direct dish skew plate is numbered and were zero skew is at but you need to turn the dish "like a steering wheel" 14.3 degrees clockwise.
It's been a while since I messed with a NFHD, but you need to get into your Antenna menu, select AMC4...
DiSEqC settings (?) Need to know if you have any switches.
Select TP by highlighting it & click ok. In this menu you can add or edit TP's
Add 12020 H 30000 QSPK Auto
click ok
Add 12060 H 26700 QSPK Auto
click ok
Add 12120 V 30000 QSPK Auto
click ok
When you have "quality" or a green bar peak your dish to the highest possible percentage, & scan
Don't worry about signal strength so much you want to focus on "Quality"
Toys include:
1. 36” Motorized GeoSat w/DMX522
1. 48” Motorized ASC Signal DMX522
1. 10' Unimesh 18” actuator DMX741
1. 10' Unimesh 18” actuator DMX741U
1. 10' (no name solid) used as a solar collector
ill wait til i get my *****Spacelab DSM-3022 DIGITAL SATELLITE METER****
than do a little dancing wit the dish....
hopefully it in deed identifies the birds!!!!!!iiiii
while Ill sip on little, aquavit?
I got the dish new with paper work and it has some specification on a paper that came with
it.
--"USA aliment chart for Satellite @95 west longitude"--
36" multi-satellite antenna assembly manual for directtv 95*w/101*w
por brand international inc model 36dshr0-02
determining my lat. long (latitude and logetude my skew would have to be at 98 degrees.
so on the this if in standing in 'back' of the dish I turned the dish clock wise 8 degres.
90 degrees is the perpendicular and parallel dead center.
than hxxp://www.geosatfinder says that I should go to the 'front' of the dish
and turn the linear lnb counter clock wise (+14.03 degrees)
****and now!!!ii satbeams.com tells me to Elevation angle:39.7°xoxox LNB Tilt (skew):-13.8°
oh boy am i in trouble
no?
skål
Last edited by Gold; 03-14-2011 at 02:35 AM. Reason: removed link