Hey guys, I am currently running a T5 HD, and with the recent tp changes is there an easier way to rescan sats? without having to manually scan each TP?
Hey guys, I am currently running a T5 HD, and with the recent tp changes is there an easier way to rescan sats? without having to manually scan each TP?
Thanks I'll try that!
Any other suggestions, I am needing to scan channel 110 manually, food network dish.
Then scan that to.
---------------------------------------------------------
Thanks for everything and the years of fun and friendship!!
I will, I am having someone come to re aim my dishes to see why im not catching most of them.
I did a factory reset on an stb a few days ago and during the rescan I had to make some changes to a few transponders on 110w in order to get a signal again.. Give this post a read before you go re aiming your dish which is probably not necessary, anyways here is the post: http://www.satfix.net/showthread.php...90#post1161890 try making those changes and see if you get the channels back you are missing.
Good Luck!
ALL information contained herein is for educational and informational purposes only.
Any information contained herein is public knowledge and reposted as such. I take no responsibility for any misuse of any information contained.
thanks! it actually turns out some of my lnbs plastic coverings have broken due to the winter
Some tp from 110 was update to 8psk 2/3. That means the factory sat list need to be updated with the new tp freq spec 8psk
Like this.
l 110 TP was changed from 20000 QPSK 7/8 to 21500 8PSK 2/3:
01 - 12224 R
02 - 12239 L
03 - 12253 R
05 - 12282 R
06 - 12297 L
08 - 12326 L
09 - 12341 R
11 - 12370 R
14 - 12414 L
15 - 12428 L
24 - 12559 L
How to delete TP's I don't need it?
Thanks for the list. Will change the frequency and hopefully get the channels back unless it has to be changed from the servers end to view them.
All you need to do is go to manual scan...see tp 12.224
Change symbol rate to 21.500 - Set Tranmission to Turbo 8PSK - FEC to 2/3
Exit out, then go to auto scan on 110
Are you saying that putting network scan 'on' will automatically change the TPs to 21500?