Results 1 to 8 of 8

Thread: sv-hd8000/lost channels.

  1. #1
    Join Date
    Oct 2012
    Posts
    34
    Satfix Buxs
    295
    Thanks
    11
    Thanked 1 Time in 1 Post

    Default sv-hd8000/lost channels.

    Hello to all, I,m missing these channels on sv-hd8000. 300,301,302,303,305,318,319,320,350,352,353,355, and no ppv channels. this is the setup that i have always used,and when scanning channels it,s shows failed or locked on some of the channels.

    Disk Settings:

    Satellite : Echostar 14
    Lnb type : ocs-dp
    Lnb frequency: 11250
    22KHZ : off
    Lnb power: on
    Transponder : 12224
    Search option: All
    Network search : off
    Diseqc : port 1
    Motor : Disable
    Legacy switch : off

    Satellite : Echostar 10,11
    Diseqc : Port 2


    VERSION INFORMATION:

    Product : sv-hd 8000
    Boot loader : 02.07
    Main software : HD 20E
    Front software : vB-07

    Please help and thanks in advance to all.

  2. #2
    Join Date
    Oct 2012
    Posts
    132
    Satfix Buxs
    1,010
    Thanks
    92
    Thanked 96x in 57 Posts

    Default

    Dish may need tweaking
    Last edited by d1964; 05-07-2015 at 12:53 PM.

  3. #3
    Join Date
    Sep 2012
    Posts
    2,586
    Satfix Buxs
    40,980
    Thanks
    8,598
    Thanked 3,676x in 1,512 Posts
    Items USACrown RoyalDishFootballbeerBirdImmunity to TheftMexico

    Default

    Quote Originally Posted by killer1845 View Post
    Hello to all, I,m missing these channels on sv-hd8000. 300,301,302,303,305,318,319,320,350,352,353,355, and no ppv channels. this is the setup that i have always used,and when scanning channels it,s shows failed or locked on some of the channels.

    Disk Settings:

    Satellite : Echostar 14
    Lnb type : ocs-dp
    Lnb frequency: 11250
    22KHZ : off
    Lnb power: on
    Transponder : 12224
    Search option: All
    Network search : off
    Diseqc : port 1
    Motor : Disable
    Legacy switch : off

    Satellite : Echostar 10,11
    Diseqc : Port 2


    VERSION INFORMATION:

    Product : sv-hd 8000
    Boot loader : 02.07
    Main software : HD 20E
    Front software : vB-07

    Please help and thanks in advance to all.
    friend I,m assuming you have dp lnbs by the ocs-dp on settings for sat 119 try tp 12297 instead of 12224 with port 1 because its wrong and for sat 110 try tp 12282 with port 2 for sat 110,and make sure you have good signal and quality,and remember there was a ecm the last couple of days and not all channels might not be up on your server yet....
    Last edited by steven charles; 05-07-2015 at 05:48 PM. Reason: forgot a letter

  4. #4
    Join Date
    Sep 2012
    Posts
    2,586
    Satfix Buxs
    40,980
    Thanks
    8,598
    Thanked 3,676x in 1,512 Posts
    Items USACrown RoyalDishFootballbeerBirdImmunity to TheftMexico

    Default

    Quote Originally Posted by killer1845 View Post
    Hello to all, I,m missing these channels on sv-hd8000. 300,301,302,303,305,318,319,320,350,352,353,355, and no ppv channels. this is the setup that i have always used,and when scanning channels it,s shows failed or locked on some of the channels.

    Disk Settings:

    Satellite : Echostar 14
    Lnb type : ocs-dp
    Lnb frequency: 11250
    22KHZ : off
    Lnb power: on
    Transponder : 12224
    Search option: All
    Network search : off
    Diseqc : port 1
    Motor : Disable
    Legacy switch : off

    Satellite : Echostar 10,11
    Diseqc : Port 2


    VERSION INFORMATION:

    Product : sv-hd 8000
    Boot loader : 02.07
    Main software : HD 20E
    Front software : vB-07

    Please help and thanks in advance to all.
    friend also try posting the settings for sats 110 and 129 to make sure there correct too....

  5. #5
    Join Date
    Oct 2012
    Posts
    34
    Satfix Buxs
    295
    Thanks
    11
    Thanked 1 Time in 1 Post

    Default

    dont have 129, and echostar 10,11 /110 is the same as 14/119. satellite: echostar 10,11 /diseqc: port 2, as stated above. thanks

  6. #6
    Join Date
    Sep 2012
    Posts
    2,586
    Satfix Buxs
    40,980
    Thanks
    8,598
    Thanked 3,676x in 1,512 Posts
    Items USACrown RoyalDishFootballbeerBirdImmunity to TheftMexico

    Default

    Quote Originally Posted by killer1845 View Post
    dont have 129, and echostar 10,11 /110 is the same as 14/119. satellite: echostar 10,11 /diseqc: port 2, as stated above. thanks
    friend the transponder for sat 110 and 119 should be different you should have for sat 110 you should have transponder 12224 or 12282 which ever gives you better signal and quality with port 2,and sat 119 its transponder 12297 with port 1,put that and rescan the sats,and like I said on the other posts,for sat 119 the transponder its wrong its not 12224 its 12297 with port 1 for sat 14/119...
    Last edited by steven charles; 05-17-2015 at 06:50 PM.

  7. #7
    Join Date
    Oct 2012
    Posts
    34
    Satfix Buxs
    295
    Thanks
    11
    Thanked 1 Time in 1 Post

    Default

    12297 keep failing, any way to correct this issue. Thanks

  8. #8
    Join Date
    Oct 2012
    Posts
    1,871
    Satfix Buxs
    12,439
    Thanks
    4,055
    Thanked 2,052x in 934 Posts

    Default

    When scanning you don't have to start on any particular transponder. The box will scan all transponders whether they are dead or alive. The only time you have to change transponder is if you were aligning a dish as some transponders you can't receive so picking one that is alive only makes sense. good luck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •