mag254 changing servers

[tire]

Can you add servers on the mag254 so you can switch between them are there a sticky for that?

[tbird686]

The new 0.0.18-r11-250 or (245) file…..this is for the mag 250 or the 54 boxes

Unplug the box then plug it back in

Watch for the part on the screen where it says push menu to get into settings.

Once in the settings go to system settings
Then servers
then portals
there will be an option to press f1 on the bottom of the screen.

Press f1
Turn on multiportal mode
Leave the default portal

Change the load delay to 10 seconds
Enter up to 8 portals

Save exit


On the screen I will say loading portal press menu

Bam!!!

Pick the service you want………and to change push menu go to setting then click reload portal

And repeat!!!

[tire]

Will i need to do a software update? i didnt see anything on botom of page to press f1

[Glatt]

In the settings menu go to bottom left to software update then push f1update!!

[astaza]

sorry guys,
I have the version 0.2.18-r4-250 . how can i update my mag 250. i tried to update automaticaly but(from htttp) it fails .i have already a server on it. do i nneed to upadete from a usb drive? and where to find the new r 11 version?
thanks

[runamok]

sorry guys,
I have the version 0.2.18-r4-250 . how can i update my mag 250. i tried to update automaticaly but(from htttp) it fails .i have already a server on it. do i nneed to upadete from a usb drive? and where to find the new r 11 version?
thanks

When in software update menu hit channel down button once to go to box under the HTTP box there the r11 file should be showing.

[astaza]

for me when i click on verify it gives me : available version 218. descrp. 0.2.-r5-pub-250. (not r-11) thanks

[wattso99]

Mine don't have a "menu" button on it.

[Satan_Inside]

I'm also having a problem updating the 254 to r11, mine shows r3, it gives me an update url with a port but if I hit verify it says no correct url and I have to cancel it

Satan_Inside

[tbird686]

the box must be connected to the internet to do the update

i had that issue before too

[Satan_Inside]

It is connected to the internet, I'm able to watch vod's and any other channel so I know my internet is working not sure if the url is correct, could that cause a problem?

Satan_Inside

[tbird686]

well first we have to be in the inner portal

one way is to reboot the box and while its loading it says some thing about inner menu and you have to push the set button on the 250 and the menu on the 254 and that is the ont lone lower left of the arrow keys

then get into the inner portal

go to the system setting then to up day

from what i remember then there will be info saying to update press f4 the red button

then it should do the update if not we can work from there i can check mine right now its in use

[astaza]

no need to uplug,for 250 setting then inner portal autoupdate (allowed), press f2( update manually) then f1 and it willl be upadated to r11.

[Satan_Inside]

Thank you tbird686, the update worked the way you said....now if I can get the guide to change channels for me I'll be ok and if I can find a channel list so I can know where everything is at I'll be good....thanks again...

Satan_Inside

[tbird686]

what service are you using?

pm me i have a few for sale lol