Try to align Dish Mx 77w need help

[Bobburger]

Hi all,

Try to align my motor dish to 77w for Dish Mx I have a quad invacom I need the LNB type settings

Local frequency

I'm located in Quebec city

Sat is call QuetzSat 1 at 77w

thanks for your help.

[Anubis]

If you go to Lyngsat you can get the info you are after.

[Bobburger]

I don't see the L.O. frequency setting like ku 11250 for 82 91 110

and lnb type ku for 82 91 110

that's for my rx pinwheel hd.

thanks

[whoknows]

Don't believe it matters as your p$ doesn't give you access to those channels on that satellite. Use ku 11250

[Terryl]

If your in Quebec city Canada then don't even waist your time.

Your outside the footprint for the Mexican channels on E8 at 77W, look at this foot print map for that satellite, select the E8 Mexico beam.

http://www.satbeams.com/footprints?norad=27501

[fn59]

I tried to get E8 with a larger dish, further south than Quebec. It was a no go.

[Bobburger]

thank you guys for all your help