the guide is okay, i'm using a usb flash drive to get almost a 48 hr guide, right now i have a dish 500 with dpp twin lnb on port 2, on port 1 i have a vip 211 powering the lnb so the jynxbox won't over heat. the dpp lnb's require a lot of amps to work, a little more than the fta boxes can produce. you can cascade the switches so you can view 5 sats. today i'm trying to connect a turbo hd dish that has the 119/110/129 sats. it has the triple dpp lnb with 3 outputs and 1 input, this is where i'm having an issue and will have to read up to find a fix. If i were you i would dump the 44 switch even the sw versions need a lot of amps to power.
If you are setting up a turbo hd 3 eye LNB you need to read thread/ bad LNB /.
You need to know if you have an eastern ark LNB or a western ark LNB, the eastern ark LNB will not work for iks.
If you need more help, start a new thread in this section and ask, I will help you setup your dish and your provider receiver & jynxbox.
the western arc uses the 119/110/129...the eastern arc uses 77 and 72 and 61.5
Nice to no. Glad some asked before I did. Going to get v6 or v7, but like to no if it's motor friendly and can u make it free to air while having private server?
i have v10 and i had have v3 and v4. v10 has been the best so far this is the first one i would say does a good job
I saw some v4's on Amazon cheap. Is it worth it to spend the extra for the v10 over the v4?
the version 10 is way more stable the v3 and v4 the display would change and even change channels the v10 has never done that the outputs componet and compostive cables have worked great dvr works goods it is the best one i have had yet
Hard to say guys there so many different ones out there. Have ran v1,v2,v3 and v7. they all work good. Just got an e-mail that v11 and v12 are being release to see if I was interested in them . Seem to be getting a little more confusing
Full HD 1080P H.264 solution
Embedded Dual Core High performance 400Mhz 32bit CPU
128Mb 16 bit DDRII 800 SDRAM
MPEG-2 MP HL video decoder
AVC/H.264 HP L4.1 video decoder
MPEG4 ASP supported
JPEG decoding accelerator
Support 4 Video VDAC, can output YPbPr and CVBS simultaneously
Build-in HDMI with HDCP
Support full HD output
MPEG-1 layers I, II and PCM down-mixing
IEC958 S/PDIF digital output
Digital mute control and volume adjustment
Support Dolby down-mixed 2 channel
Support 2 channel HE-AAC V1
Build-in 2 channel Audio DAC
Dual USB 2.0 host interface
10/100 Mbps Ethernet MAC with RMII
Serial RS-232 Interface
Universal Remote
650mA LNB Output
IR extender Output
MicroSD Card Slot
Built in bracket for Wall Mountable solution