Please help ud error and network adapter isn't ready message

[hkat777]

Im having issues with my new 8000hd first there is a ud error upon boot second its not sensing the network adapter or ipconfig settings upon hard reboot i need to turn power off from remote in order for ipconfig option to show up and network adapter connected message doesn't show upon boot thanks in advance

[hkat777]

thanks for your reply i got it up and running and ive tried a ud error bin from another site but that didnt work tvs on now so keeping my fingers crossed that itll stay that way

[fenders]

What was the fix for this?

[hkat777]

Hmmm I think I just loaded the newest bin it's been awhile but I did have issues and needed a different box not sure if this post was b4 or after I replaced I'd try the newest bin hope that works for you

[zombola]

You can try loading factory then if it take factory file you can load the HD20-bin for the 8000hd.You may need to load factory file with null cable from computer and load program.It you try the factory file unplug hub first and don't connect until you get the hd20 file back in receiver.


factory file here
http://www.satfix.net/showthread.php...le-Nov-21-2009
hd20file
http://www.satfix.net/showthread.php...ix-May-05-2012

[SLIMAK]

check for error 82.9 ... I had same proble before... First you will need four (4) files: (1) wiznet 3.0.2, (2) SV8000HD_svlan_HD11_a.BIN, (3) svlan_V43 and (4) HD20.bin