viewsat ultra
yes I had all my chann at my other location
I bought all new coax cables
I will try them tomorrow
ill let you know
thanks
viewsat ultra
yes I had all my chann at my other location
I bought all new coax cables
I will try them tomorrow
ill let you know
thanks
ok
update...
I did a blind scan and I was able to get some of the channels that I couldn't get with auto scan
Any idea why?
Please post your settings, for your dish, might have something to do with legacy sw.
IMG_1018[1].jpgIMG_1019[1].jpgIMG_1017[1].jpg
here are my settings
also last picture shows my result. only 290 channels from 50 tp on both sats
Your problem is a bad line connection or connector!! Tell me that when you scan your channels you only get Vertical not Horizontal channels!!
Glatt,
I did run the lines directly to the viewsat box and the same result.
these are new cables...I tried with and without the switch
I will check on the vertical versus the horizontal channels for you
thanks
yes. if my back is at the satellite looking at the lnbs
the 2 lnbs on the left are together as one.
the one on the right 110 is by itself.
thanks
question..
isn't it 7=119?