sv 360p connects ok but won't scan sats

[beambeam]

I've noticed with the latest file, that after a factory reset the lnb frequency is at 10750, have to change it to 11250 before rescanning.

That was the problem.Thank you for your help.

[beambeam]

Download this file.
Upload the file to your box and let us know what happens.
http://www.satfix.net/showthread.php...chnlst-1-10-14

Good luck,
Sp0iler

It's working now.With the factory file the lnb freq.was changing.Thank you for all your help.

[beambeam]

It sounds to me like fn59 has got the answer for ya. Thanks!

That was the problem.Thank you.

[beambeam]

The factory file you should be using is http://www.satfix.net/showthread.php...110-March-2009

There are also these factory files. http://www.satfix.net/showthread.php...w_Factory-2010

If those don't work then you could try using the system clean file...http://www.satfix.net/showthread.php...r_SysCleanFile

I would do each one twice and then see if that helps

Can you post your satellite setting...I don't think you have them right since you did the factory default.

It's working now.The factory file was changing the lnb freq.Thank you.

[airjam]

I've noticed with the latest file, that after a factory reset the lnb frequency is at 10750, have to change it to 11250 before rescanning.

Good eye fn59