Help

[ditchpig_99]

Looking for anyone that mite know why my 9600 hd won't bring in bev . I have put in everything the same as I did for Charlie signel is stong 98% qual 85% I'm thinking that mabe the settings are different can anyone help (new dicswitch as well) THanks

[swanner]

I have an Ilink9500hd, ilinks don't like beverly.....
I read somewhere for you to try this..
make sure dic and bev accounts are connected in server settings,
go to a working dic channel, then in the guide i think, switch over to a bev channel and see if you get picture....
there is somewhere in the receiver thread for Ilinks talking about this issue...
I will try to see if I can find that thread again and post if for ya...

swanner

[swanner]

Here is one posting I read about our ilink and bev issue...

http://www.satfix.net/showthread.php?126378-Ilink-9500-BEV-bin-lt-moved-gt 

Read Post #2 and #4


I think this is one of the other downfalls with the Ilink units unfortunately

good luck...

swanner

[ditchpig_99]

Thanks. So they are saying that i need to sit on dish and then put in the channel #on bev and it mite work ????

[swanner]

I believe so, but I to this day cannot get my 9500 to do it.. and from what I hear the 9600 are no better...

good luck..

I'd test for you and try myself, but I'm having switch issues that I have to wait to correct.. too cold and frozen to do now..

swanner

[ditchpig_99]

would any one know if there is a fix for this problem besides buy a diffrent brand??

[Hamboner]

From my findings so far I dont think there is any other option, I have 4 friends with same reciever and we all added bev, it was hit and miss getting bev to work. We noticed that once both servers said connected by forcing the connection (hitting red button then blue then green button then blue) we would go to a bev channel and let it sit for a good minute or 2 it would come in but then when changing back to dish and then going back to bev we would again have to wait for a couple mins for the channel to come in.

Also, we noticed that when scanning in 91 and 82 not all the channels would scan in... this is only an ilink and freesat issue as I have many other models and they all scanned the 2 sats in fine. Example bev 91 only scanned in like 300 and some channels when there should be somewhere in the 600 range.

Just my 2 cents worth

[ditchpig_99]

thanks forthe info

[swanner]

I tried Last night all kinds of attemps in Post 7, and I had no luck... That's with my 9500HD....
So I borrowed my neighbors Dreamlink and set it up to my home, and all scanned in no problems...

So it has to be an ilink problem for sure....
Sure would be nice if there was a newer bin or something for all the Ilink models....