Results 1 to 3 of 3

Thread: New Jynxbox, please help.

  1. #1
    Join Date
    Nov 2012
    Posts
    8
    Satfix Buxs
    151
    Thanks
    0
    Thanked 0x in 0 Posts

    Default New Jynxbox, please help.

    I have a Jynxbox Ultra HD v2 with a Dish 500 w/ Dish Pro Plus Twin LNB. I installed the 2.37 firmware and did hard boot, I scanned for channels and was even able to watch tv last night. A few questions, I tried to put the network info info in slot 1, everything was copied over from my working Nano2, port 15010 but it kept saying connection failed when I hit apply. But I was able to watch cable yesterday so not sure what the problem was.

    That being said, when changing through the channels the remote would just freeze up with a black screen and the buttons would not work, the red light indicator would still flash when I hit a button but only way out of it was by doing a hard reset from the back. Is this happening because of the server settings? Or is do I not have enough power with my setup to the lnb's? Everything was working good on the Nano2, thanks for your help in advance.

  2. #2
    Join Date
    Sep 2012
    Posts
    2,586
    Satfix Buxs
    40,980
    Thanks
    8,598
    Thanked 3,676x in 1,512 Posts
    Items USACrown RoyalDishFootballbeerBirdImmunity to TheftMexico

    Default

    Quote Originally Posted by chs1982 View Post
    I have a Jynxbox Ultra HD v2 with a Dish 500 w/ Dish Pro Plus Twin LNB. I installed the 2.37 firmware and did hard boot, I scanned for channels and was even able to watch tv last night. A few questions, I tried to put the network info info in slot 1, everything was copied over from my working Nano2, port 15010 but it kept saying connection failed when I hit apply. But I was able to watch cable yesterday so not sure what the problem was.

    That being said, when changing through the channels the remote would just freeze up with a black screen and the buttons would not work, the red light indicator would still flash when I hit a button but only way out of it was by doing a hard reset from the back. Is this happening because of the server settings? Or is do I not have enough power with my setup to the lnb's? Everything was working good on the Nano2, thanks for your help in advance.
    friend try posting the settings for each sat your pointing too,and whats the signal and quality your getting on each sat,and what private server your using....

  3. #3
    Join Date
    Sep 2012
    Posts
    16,241
    Satfix Buxs
    2,380,488,878,337
    Thanks
    23,704
    Thanked 27,829x in 10,218 Posts
    Items DevilBeef
Gift received at 01-24-2014, 04:26 PM from swanner
Message: Thanks for Your Input, with all the Hot Heads around.. Should be cooked in No Time..LOLDish
Gift received at 12-15-2013, 09:10 PM from holly2012
Message: From an Old FriendDog
Gift received at 10-30-2013, 12:15 AM from Just_angel
Message: love chloe xoxoxWhiskey
Gift received at 03-27-2013, 03:33 PM from thebeav
Message: found this behind the dumpster at the casino when i was looking for W H :)Heart
Gift received at 11-20-2012, 12:22 PM from Just_angel
Message: x0x0A Beer
Gift received at 11-06-2012, 03:58 AM from Styx_N_Stones
Message: I seem to have accumulated too many beers... LOL!Crown Royal
Gift received at 10-11-2012, 03:49 PM from Just_angel

    Default

    Quote Originally Posted by steven charles View Post
    friend try posting the settings for each sat your pointing too,and whats the signal and quality your getting on each sat,and what private server your using....
    they already have a thread going with plenty of replies

    DODGE the father

    RAM the daughter



    “Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.”

  4. The Following User Says Thank You to dishuser For This Useful Post:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •