PDA

View Full Version : I have 2 different servers on 2 of my sv8000 but it freezes all the time



zamo
11-24-2013, 05:35 PM
Hello guys I have 2 different servers with different ports 50000 and 40000.
The problem is If I turned on both recievers at the same time they started to freeze.
One would show the other would freeze.then when the other start to show the other freeze.
I dont understand why.if it was the same server on both then I know only one would show,
Why is this happenning
Can somebody help please ?

runamok
11-24-2013, 06:30 PM
What is your dish setup to both receivers?

zamo
11-24-2013, 06:50 PM
What is your dish setup to both receivers?

Satelite..echostar 10, 11
Lnb type.............. single
Lnb frequency.... 11250
22 khz................. off
Lnb power........... on
Transponder........ 12530
Search option......all
Network search..on
Diseqqc........ port 3
Motor......... disable
Legacy switch.... off


119 and 118 on another port frequency. 10750
129 single lnb and so on

runamok
11-24-2013, 06:57 PM
Satelite..echostar 10, 11
Lnb type.............. single
Lnb frequency.... 11250
22 khz................. off
Lnb power........... on
Transponder........ 12530
Search option......all
Network search..on
Diseqqc........ port 3
Motor......... disable
Legacy switch.... off

This info is settings.I meant dish hardware.Your problem maybe dish related or server or internet.

zamo
11-24-2013, 07:02 PM
I have a 33 inch dish and 5 sats
My internet has 2 wireless adapter.one adapter on each reciever.
My servers are iksps and gator.
One has a port 50000
The other server have 40000

I have 2 different switch with each line going to its own reciever.


Anyways I used to have different server before on both and they show without anyproblem
Only now I see this happens

runamok
11-24-2013, 07:53 PM
Your 33" dish has 5 lnb's on it?

zamo
11-24-2013, 07:56 PM
3 lnb
1 for 129
1 for 110
1 for 119 and 118

Sp0iler
11-24-2013, 11:21 PM
Your problem is most likely a network issue.Your network is confused over which box gets what data and you freeze.
Confirm the "Local ip's" are different in your "Network settings"
Set both dongles to "DHCP" and reboot everything.
Start with your router/modem first and then restart the boxes one at a time letting the router assign ip's as it detects the dongles.
Post what you learn.

Fibroso
11-25-2013, 01:32 AM
Setting one box in static and using Google dns on your routers may do the trick.

zamo
11-25-2013, 07:15 AM
Setting one box in static and using Google dns on your routers may do the trick.

how u set the router on google dns?

urrout
12-12-2013, 01:47 AM
I have just posted with a similar problem. Both receivers freeze when on together. I discovered one of my iHub's mac address has changed so now they both have the same mac address. I don't know how it happened and looking for a solution.

botak
12-29-2013, 12:43 AM
I did your suggestions now it works well .
Thank you very much !

ftastudent2
01-17-2014, 02:34 AM
how u set the router on google dns?

8.8.8.8 or 8.8.4.4 etc