PDA

View Full Version : Can't get receiver to recognize WIZ110SR



markd
10-22-2013, 07:48 PM
Got a wiz110sr and loaded sv4.12 on it and the sv8000 does not recognize the dongle as far as I can tell. Also loaded HD20-2028 to receiver. Put all the correct IP addresses via the loader program. When you start the loader and do a search it finds the dongle, shows the ver. 4.12. Can anyone help or is there a step by step process I missed? Thanks

runamok
10-22-2013, 09:20 PM
Did you load the hd20 2028 *nochk* file?

Sp0iler
10-22-2013, 10:23 PM
In Wiz, You need to change the baud rate (speed) to 115200.

Added: Look here
http://www.satfix.net/showthread.php?135056-Ihub-replacments-for-only-26!&p=963188#post963188

markd
10-22-2013, 11:31 PM
Yes, the baud rate was set correctly and at first I used just the regular HD20 2028 file and got nothing. Then I used the HD20 2028 no check 2nd chksum 2nd try file and all is being recognized. Thanks to all for your help and input.