ontariotl
09-25-2013, 10:46 PM
Today I was playing around with the PVR function with a USB stick. Weird thing is after I played back the recorded feed, I went back to a channel and it was all black. I thought that was strange when I just recorded a feed from a channel and my donation was connected.
So I check the network settings and it says it isn't connected. So i rebooted. Came back and still no connection, so I let it sit there and finally after 5 mins my picture is back on. Ok, so I thought I would check my network settings again and sure enough it says it is not connected (but yet I have a feed), so I get out of the network settings, the feed plays for a bit then craps out because it believes there is no server connected. This is getting really weird. I even try a wizlink and same results. I thought my receiver was toast, and yet annoying when all of a sudden it picks up the feed and I have connection (even though I go into network settings and it say otherwise)
Since I have two SV8K's, I thought I would hook it up. Sure enough, both original ihub and wizlink see the server immediately when I go into network settings. However the same thing happened to this receiver when I put in a USB stick and played back the recording from the 1st SV8k. Played fine, then exited which brought me to a blank channel and no connection. Now I can't connect immediately with this receiver like the 1st one.
Just seems like it will connect to the server, but it takes a long time from a hard boot, soft boot it connects immediately. This wasnt a problem until I recorded something and played back off a USB stick. And when I connect eventually, if I go check the network settings, its almost like I disturb it and it disconnects for a few mins again. thats the best I can describe it.
Any idea's? Any help would be appreciated.
So I check the network settings and it says it isn't connected. So i rebooted. Came back and still no connection, so I let it sit there and finally after 5 mins my picture is back on. Ok, so I thought I would check my network settings again and sure enough it says it is not connected (but yet I have a feed), so I get out of the network settings, the feed plays for a bit then craps out because it believes there is no server connected. This is getting really weird. I even try a wizlink and same results. I thought my receiver was toast, and yet annoying when all of a sudden it picks up the feed and I have connection (even though I go into network settings and it say otherwise)
Since I have two SV8K's, I thought I would hook it up. Sure enough, both original ihub and wizlink see the server immediately when I go into network settings. However the same thing happened to this receiver when I put in a USB stick and played back the recording from the 1st SV8k. Played fine, then exited which brought me to a blank channel and no connection. Now I can't connect immediately with this receiver like the 1st one.
Just seems like it will connect to the server, but it takes a long time from a hard boot, soft boot it connects immediately. This wasnt a problem until I recorded something and played back off a USB stick. And when I connect eventually, if I go check the network settings, its almost like I disturb it and it disconnects for a few mins again. thats the best I can describe it.
Any idea's? Any help would be appreciated.