PDA

View Full Version : Setting up SV8000?



scubadawg
06-12-2013, 04:44 AM
I inherited my friends SV8000 and iHub

I setup the IKS IP address, and checked the WIZ Configuration tools, everything is connected to the ihub properly, and I see connecting on the network.

But it still sees it as scrambled on the channels

This is my system info:

Boot Loader: 02.07
Main Software: 05.12
Front Software: vB-07

What software do I need to update so this will work?

Thanks

It's Jafo
06-12-2013, 09:07 AM
Current working file for the 8k is located here:
http://www.satfix.net/showthread.php?119203-SV8000HD-HD20-bin-CCE-Fix-May-05-2012

Update and see if you can connect.

scubadawg
06-16-2013, 05:34 AM
Hi
Thanks for the link, I did the update and it works, I was able to scan 110, and it's up and running, when I scan 129, I only get about 5 channels, do I need another module to add to the SV8000 to get the HD channels

dishuser
06-16-2013, 05:41 AM
Hi
Thanks for the link, I did the update and it works, I was able to scan 110, and it's up and running, when I scan 129, I only get about 5 channels, do I need another module to add to the SV8000 to get the HD channelsya you need an hd module

scubadawg
06-16-2013, 06:49 AM
Thank you, found out I need the 8SPK module

sonofzion42
08-27-2013, 04:19 AM
Need Help here, will my sonicview 8000 still work? i have the very first dongle. i heard i need to convert it to svlan? wiznet? what files do i need for my box and my hub?

Thanks in advance!