PDA

View Full Version : Cannot properly load TP file



thebestguru333
04-23-2013, 08:34 AM
Prior to trying this, several hours ago, I was getting hd n non hd channels but not ESPN and TNT.

I decided to give the TP update and channel list update a try, both independently and together. FAILED.

I have the latest files.

I am not sure what I am doing wrong, please expose my flaw.

loaded the TP update bin.
(Now I see espn and tnt but obviously they dont work)
Went to user options and turned OFF auto tp update.
Set up my satellites under dish settings. (Do i leave network search on or off?)
scanned the sats.
I get Channels, but not ESPN or TNT.

I repeated the steps above with the updated channel list(latest file). no luck.

It's Jafo
04-23-2013, 10:01 AM
Load this file : http://www.satfix.net/attachment.php?attachmentid=17391&d=1358360799
Delete all the channels and rescan your sats.

thebestguru333
04-23-2013, 04:37 PM
Thank you.

Quick question- what should be my dish settings? should auto tp update be on or off? network search on or off? i assume 22hz should be off in all cases?

Thank you again.

It's Jafo
04-23-2013, 06:29 PM
All on but auto tp update to off.
As for sat settings.... no idea what you have.
Next time, write them down before doing anything if you don't know them.

thebestguru333
04-23-2013, 06:40 PM
All on but auto tp update to off.
As for sat settings.... no idea what you have.
Next time, write them down before doing anything if you don't know them.

I have Dish 1000.2 with 110,119, 129.

119 = Port 1, 110 = Port 2, 129 = Port 3.
LNB type = OCS-DP for all.
LNB power ON for all.
22Khz = off for all
Search = ALL
Network search used to be ON for all 3 but not sure if it should be on or off for the new scan after the new channel update. Please enlighten me on this.

Anything else I am missing?

Added: I notice that for 119... I am not getting signal now. I was before, in fact i should be getting it if i am getting signal on 110 and 129, at least theoretically the way dish 1000.2 is made. What could be the issue for this?
Thanks.

bearbait
05-05-2013, 10:40 AM
I have Dish 1000.2 with 110,119, 129.

119 = Port 1, 110 = Port 2, 129 = Port 3.
LNB type = OCS-DP for all.
LNB power ON for all.
22Khz = off for all
Search = ALL
Network search used to be ON for all 3 but not sure if it should be on or off for the new scan after the new channel update. Please enlighten me on this.

Anything else I am missing?

Added: I notice that for 119... I am not getting signal now. I was before, in fact i should be getting it if i am getting signal on 110 and 129, at least theoretically the way dish 1000.2 is made. What could be the issue for this?
Thanks.

Auto TP should be off
Network search should be off
On sat 119 make sure LNB Frequency is at 11250
Make sure each sat is set to the right port before u scan any
Scan each sat twice, no the first time, yes the second