PDA

View Full Version : 8psk Installation



yogicomp
03-10-2013, 09:45 PM
Where can I find manual or instructions on how to install 8psk module in sonicview 8000HD

Fishbum
03-10-2013, 10:29 PM
You dont need manual to do that.. its really very easy...
1. unplug the receiver from power plug,
2. remove the top cover of the receiver, two screws on each side and one on the back..
3. the 8psk has three plugs.. one power, two data ribons, all three different size plugs.. you can't go wrong..
the power cable plug/clip into the power board.. http://i226.photobucket.com/albums/dd250/Fishbum26/IMG_5549.jpg
4. the two ribon cables from the 8psk plug into the main board, both are different size plugs they can only go in their own slot
Here's a pic... note in this pic I moded two fans into the receiver and tapped into the power from the 8psk line to the power board..
http://i226.photobucket.com/albums/dd250/Fishbum26/IMG_8083.jpg

5. attach the 8psk to the receiver case, poke the coax end through the back hole and fasten with the screw nut.
Attach the coax cable to the 8psk as in this picture..
http://i226.photobucket.com/albums/dd250/Fishbum26/IMG_8367.jpg
6. Put the cover back on the receiver, plug it back in and boot it up, go to Menu/External module, should say "Detected"

United
03-11-2013, 11:51 PM
Thanks for that Fishbum.....................I created a post in the FAQ's and Guides section too for ya http://www.satfix.net/showthread.php?130041-8PSK-Install-guide-%28with-pictures%29 great work thanks.