PDA

View Full Version : No signal on Porn/Tennis HD/Golf HD



xxcutive
12-02-2012, 02:27 AM
Hello to all SV8000 HD users

Recently I get no signal on these channels or more on TP12632. Does any one read this post and please confirm you get it or is there an update TP file. I installed SVK-oct2012.bin file and do the sat scan. I believe my setting are correct

Regards

dishuser
12-02-2012, 02:49 AM
tp 12253
change freq to 20000 and scan

xxcutive
12-02-2012, 07:07 PM
so is there the latest file beside the TP OCT2013.bin file. Do you mean on the 129 sat where I change the TP 12253.

xxcutive
12-03-2012, 05:51 PM
Hi
I edit the TP and exit but doesnt save.

whoknows
12-03-2012, 05:59 PM
Hit OK after you edit then exit.

xxcutive
12-04-2012, 04:45 PM
it doesnt save as 20000 but still show 21500. Polarize is V FEC is 2/3 Mode is Turbo-8.

Fishbum
12-05-2012, 07:30 AM
I posted this in another thread... this will solve your problem..

I use this one for 110,119,129 http://phoenix.satfix.net/showthread.php?121627-SV8K-channel-list-with-working-E*14-TP-12311-with-EPG
its really a channel list but the tp's have been edited...
I load this file but then do a factory default to clear out all the channels then reset all my receiver settings and then rescan
fresh.

xxcutive
12-05-2012, 04:08 PM
Fishbum
It doesnt make any sense here. First you said load that bin (I already had that bin file) and do a factory reset by means you wipe out everything. There are no channels until you load that bin again unless you do a factory reset and load that bin then go into your setting and set the right setting and rescan. that means you will get duplicate channels when you do a rescan.
Regards
ps
Are you currently able to view those channels EG. (Gofl HD 9473) (Tennis HD 9442) and alo XXX moives that just a few I 've noticed

Fishbum
12-06-2012, 06:17 AM
If you already have this file on your receiver if you do a factory default you will still have that file on your receiver.
The factory default wipes out all the channels but that bin file is still on your receiver with the current tp changes.
That bin is bascially a channel list.. your loading some one elses channel list that they created when they rescanned their own sats..
Since then some channels may have already been moved around.. so it is best to re scan fresh from on your own system (dishes)
By doing a factory defualt you wipe out all the channels in the guide but retain the sat file settings of that bin..
so you are re scanning fresh so you will not get any duplicate channels after the new scan.
By doing the factory default it fixes some other issues as well...
Yes, I do get the Golf HD 9473 strong singnal and quality same as Tennis HD 9442. All XXX channels all strong signal and quality as well....

xxcutive
12-06-2012, 06:16 PM
Fishbum
I am not quite understanding, but how ever if you can post the file that you are using and tell me the steps how to set up probably. I still dont get those channels although I load the SV8K OCT bin file and do a rescan.
Please help me out.

Regards

Please help me out

Here are what I did
Factory reset
There are no channels activities after loading this bin. Now load SVK_OCT_2012 bin and get channels
1. Dish Setting
Satellite -----------Echo 14 (119)
LNB Type----------OCS_DP
LNB Freq---------- 11250
22KHz ----------- OFF
LNB Power-------- On
Transponder------12311
Search Option----- ALL
Network Search---- On
DISEqc ------------ Port 1
Motor ------------- Disable
Legacy Switch------- OFF
2. Satellite Echo 10 (110)
same as a bove
Transponder----12224
DisEQc------ port 2
3. Satellite Ceil (129)
same as a bove
Transponder----12457
DisEQc------ port 3

Exit but still no signal on 9473 GOLF HD CIEL 12632/21500
9442 TENNIS HD CIEL 12632/21500
491 xCITE echo110 12253/21500

NOW rescan on those satellite and still show no signal on those channels. There must be a new TP file bin.
I dont get any signal all of ch 491-498. There may be more other channels that dont have signal.
This is for the SV8000 with dongle.

Thanks in advanced

Fishbum
12-08-2012, 03:47 AM
1. Load this file onto your receiver, http://phoenix.satfix.net/showthread.php?121627-SV8K-channel-list-with-working-E*14-TP-12311-with-EPG
2. Do a factory Default
3. Go into each sat 110,119,129 instalation page and re set your settings, exit and save..
4. Go back in to each of your sat instalation pages and re scan each sat (110,119,129) one at a time.

xxcutive
12-08-2012, 08:25 PM
Fishbum

Thanks a bunch for helping me out.Actually It works now but that file doesnot have 9473 HD or 9442 HD but XXX works. All these time I Thought when You load the SV8K_OCT bin and do a factory reset. it reset avery thing and load the bin and do a rescan. By the way do is it necessary to load the channel bin.

Thanks again

Fishbum
12-10-2012, 02:51 AM
When you factory default, you defaulted to the last files you put on your receiver, the factory default does not delete those files.. so no need to reinstall them.. you dont need to load the SV8K_Oct channel bin again if you already did once..
Hmmm you should get 9473 and 9442 I'm using SV8K_Oct channel bin and I am getting those two channels....
I noticed your settings above you have LNB Type----------OCS_DP for all three sats...
Are all your lnbs DP (Dish Pro) do the lnbs have "DP" printed on them ? If not likely they are legacy lnbs and you need to have your lnb setting to single or standard I think it is... might be why some channels are not scanning in correctly....
Just a hunch.. some thing worth checking though...