PDA

View Full Version : No signal Adult channels



cheff
10-25-2012, 07:54 PM
I'm not getting any signal on all adult channels? Is anyone else having an issue?

thx.
:rolleyes:

hutch
10-25-2012, 08:19 PM
rescan they have all moved to 110 like the PPV but I think we just got ECM'd so they wont come in. If you have trouble getting the channels to scan in ... change TP3 12253 to 20000 signal rate

vanfilmguy
10-26-2012, 12:19 AM
I am having the same issue, so I tried to rescan 110, and if found the new channels, but still no signal on those channels. Not sure what you mean about changing the TP3?


rescan they have all moved to 110 like the PPV but I think we just got ECM'd so they wont come in. If you have trouble getting the channels to scan in ... change TP3 12253 to 20000 signal rate

cheezed
10-27-2012, 05:49 AM
Just figured a temp fix for the no signal on porn. If the channels are scanned in just turn off Auto TP Update in the menu under settings.
I tried editing TP3 did'nt work for me. There is one drawback to turning TP Update, the epg wont poplulate on those channels.

Dalien
10-29-2012, 03:41 PM
I changed TP 12253 to 20000 but after I scan and go to a porn channel, for a split second it shows signal and 20000 but immediately it switches back to 21500 and no signal. On my Limesat, all I did was rescan and all the porns work. I didnt have to mess with TP frequecy 12253 at all. Why only my Sonicview???? Is there a way of correcting this problem??

Dalien
10-29-2012, 08:39 PM
I'm having the same issue, all my porns have "no signal". I changed tp 12253 to 20000 signal rate and rescaned. Afterwards when I would go to a porn channel, for a split second I would have signal with a symbol rate of 20000 but then the screan would suddenly change to "no signal" and the symbol rate would go back to 21500????? I guess, as previously mentioned, a person can turn off Auto TP but you dont receive any guide info. Is there a better fix than this out there?????

knd
11-01-2012, 04:33 AM
none of my scans are picking up the adult channels. anyone has the solution to this??

Sp0iler
11-01-2012, 09:19 AM
You have to edit sat 110 transponder, 12311 and change the symbol rate to 21,500 and DVB to TB 8PSK 2/3

Good luck,
Sp0iler

hutch
11-01-2012, 04:39 PM
You have to edit sat 110 transponder, 12311 and change the symbol rate to 21,500 and DVB to TB 8PSK 2/3

Good luck,
Sp0iler

These above are HD... for SD rescan 110 TP 12253V signal rate 20000 & 7/8

Sp0iler
11-01-2012, 05:49 PM
These above are HD... for SD rescan 110 TP 12253V signal rate 20000 & 7/8

We're in the SV8k (HD) section.
The post for SD doesn't need to be here.

:)

TestMeister
11-05-2012, 04:05 AM
Trying to use Channel Master to import my channel.bin file. No luck.
Never Mind: Don't use File Open. Use Import and that will work.

TestMeister
11-05-2012, 04:08 AM
I am getting a nice strong signal on several adult channels on Echo10, but "NSS" No Service or Scrambled.

Fishbum
11-06-2012, 07:21 AM
Use this file it works, however since it has been made many channels have moved again, so what I did was still load this file,
but after do a factory default, re set your menu settings, ( adult lock disable, location state ), re set your sat settings in 110,119,129
exit and save. Go back to your sat pages, I noticed with this TP file I had quality on 110 page.. but Zero quality on 119 and 129 pages.. I didnt let that fool me, obviously a clitch in the TP file.. I know my sat settings are correct.. so continued to scan 119 and 129 even though it showed zero quality coming in those pages... scans came in perfect and channels that were not working before with this TP file now work. This TP channel file here is good, just needs to be rescanned and trust your own settings and dont let the zero quality fool you on sat. 110 129 pages..
http://phoenix.satfix.net/showthread.php?121627-SV8K-channel-list-with-working-E*14-TP-12311-with-EPG

cheezed
11-06-2012, 05:55 PM
I used this same file and it does fix the no signal issue with the adult channels and the epg will work on those channels, but I had to edit one TP to get my west coast locals back. I do have an issue with my HD SciFi, TNT and a few other missing HD channels not coming in. I checked the TP for those channels in this list and everything is correct and they do scan but when I save my changes and exit out there not there. Any Idea's?

SVHD
11-11-2012, 03:50 AM
I feel a lot of what you are getting and aren't getting channel wise depends on what server provider you are using.